How to setup SysDVR with playable latency (2024)

Souperman9 said:

There's no way streaming over network will give you playable latency.

Click to expand...

It can! I got the basic idea from this reddit thread, but the instructions were unclear and didn't work, so I figured it out and made a guide.

nintenbrolluseless said:

It can! I got the basic idea from this reddit thread, but the instructions were unclear and didn't work, so I figured it out and made a guide.

Click to expand...

Huh, that's really cool actually. I'm pleasantly surprised!

xroxas99 said:

3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]
what if mine is 057e 2000 how to correct it?

Click to expand...

Sorry for the late response, that means you have the wrong device selected.

derYASIN said:

Idea for audio capturing: Connect a aux cable to switch and the computer you streaming to.

Click to expand...

I actually thought about that, but the slight latency might be more noticable. I'll try it out later with Audacity.

_Mizuto_ said:

When I lunch the Client it closes immediatly
Can you help me please

Click to expand...

Make sure hardware-accelerated decoding is set to automatic in VLC.

nintenbrolluseless said:

USB Setup (Skip if using network):

1. Connect your switch to your PC via USB (Tested using USB 3.0)
2. Launch Zadig
3. Install the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]

Click to expand...

The thrid step isn't possible if you don't start SysDVR in your Switch beforehand. Your guide doesn't mention it anywhere. Because the SysDVR (Nintendo Switch) entry doesn't appear otherwise

Tried again but same as before there is always a little lag that does not make playable the game. I tried USB mode.

In your guide the USBmode does not work if you use bridge <IP addess>

nintenbrolluseless said:

SysDVR starts on its own

Click to expand...

Well, not really? I had to start SysDVR config and set it to start when I turn the console on. After that, yeah, it starts in their own.

What I mean is I had to go to another thread to find that out. It wouldn't hurt having that info here.

Olmectron said:

Well, not really? I had to start SysDVR config and set it to start when I turn the console on. After that, yeah, it starts in their own.

What I mean is I had to go to another thread to find that out. It wouldn't hurt having that info here.

Click to expand...

My bad, must be specific to network setup. What exactly should I add to the guide?

nintenbrolluseless said:

My bad, must be specific to network setup. What exactly should I add to the guide?

Click to expand...

In this step, that is already in your guide: "ll the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]", just add something along the lines of "The Device won't show unless you already started SysDVR from the SysDVR config homebrew. If you configured SysDVR before, it should be started when you turn on your console."

Olmectron said:

In this step, that is already in your guide: "ll the libusb-win32 driver for the device SysDVR (Nintendo Switch) [Ensure the Device ID is 057e 3006 before installing]", just add something along the lines of "The Device won't show unless you already started SysDVR from the SysDVR config homebrew. If you configured SysDVR before, it should be started when you turn on your console."

Click to expand...

Fixed

Anyone tried with the portable version?